Skip to content
TroubleGrid

World of Warcraft tree shadows flicker with ray tracing on Intel Arc

Last verified November 2026Tested against Intel Graphics Driver 32.0.101.9175 WHQL (4 November 2026) - the current driver, still lists this as open, Intel Arc B-Series Graphics Products (B570, B580), Intel Arc A-Series Graphics Products (A310, A380, A580, A750, A770 and mobile A-series), Intel Core Ultra Series 1, Series 2 and Series 3 with built-in Intel Arc GPUs, World of Warcraft Classic and World of Warcraft Dragonflight on the DirectX 12 renderer - the two clients Intel names, Intel Graphics Driver 31.0.101.5186 - the version that fixed the separate, older 'ray tracing cannot be enabled' problemGood evidence

Turn ray-traced shadows off in World of Warcraft. Intel lists flickering tree shadows in World of Warcraft Classic and Dragonflight on DirectX 12 with ray tracing enabled as an open known issue on every Arc GPU it ships - the dedicated A-series and B-series cards and the Core Ultra integrated Arc GPUs alike. It is still unfixed in 32.0.101.9175 of 4 November 2026, which is still Intel's current Arc driver as of 17 November 2026, so disabling ray tracing is the only reliable way to stop it today.

Two different Intel Arc ray-tracing problems in World of Warcraft get mixed together constantly, and the fix for one does nothing for the other. If shadows flicker, you have the current bug and there is no driver to update to. If ray tracing cannot be switched on at all, you have an older problem that Intel resolved in a 2024 driver. This page separates them.

Symptoms

  • Tree shadows flicker, shimmer or pop in and out as you move the camera or your character
  • The flickering appears only with ray tracing enabled, and stops when you turn it off
  • You are on the DirectX 12 renderer - the flicker does not occur under DirectX 11
  • You are using Intel Arc graphics, either a dedicated A-series or B-series card or a Core Ultra with built-in Arc graphics
  • The rest of the scene renders normally, so this looks like a shadow bug rather than general instability

Why this happens

Intel's ray-traced shadow path flickers on tree shadows in WoW's DX12 renderer

Intel validates World of Warcraft against its Arc drivers and records this as a known issue: in World of Warcraft Classic and World of Warcraft Dragonflight on DirectX 12, tree shadows may flicker when ray tracing is enabled. What makes it clearly a driver-side bug rather than a game setting gone wrong is the scope - Intel repeats the same entry under every one of its graphics families, from the Arc B-series cards down to Core Ultra Series 1 integrated graphics. It sits under Known Issues, not Fixed Issues, in 32.0.101.9175, so Intel had not resolved it as of 4 November 2026.

Disable ray-traced shadows in WoW's graphics settings · Switch WoW to the DirectX 11 renderer

A different, older bug stopped ray tracing being enabled at all

Separately, Intel published a support article for Arc owners who could not turn ray tracing or variable rate shading on in World of Warcraft in the first place. That one has a real fix: driver 31.0.101.5186 or newer. Intel last reviewed the article in December 2024. If your complaint is a greyed-out or missing ray tracing option rather than flickering shadows, this is your problem and updating the driver solves it - which is why it is worth knowing the two apart before changing settings.

If ray tracing cannot be enabled at all, update the driver instead

Fixes

Disable ray-traced shadows in WoW's graphics settings

about 3 min

Intel names ray tracing being enabled as the condition for the flicker, so switching it off removes the trigger. Intel's own support staff suggest the same step for DX12 rendering faults on Arc.

Applies to: World of Warcraft Classic and Dragonflight on DirectX 12, Intel Arc graphics

  1. In World of Warcraft, press Escape and open Options, then System, then the Graphics tab.
  2. Set the Graphics API to DirectX 12 if you want to keep it - the ray tracing options only appear there - or skip to the next fix if you would rather drop to DirectX 11 entirely.
  3. Find Ray Traced Shadows and set it to Disabled. Depending on your client version this may be a single Ray Tracing toggle rather than a shadows-specific one.
  4. Apply the change. The flicker should stop immediately, without a client restart.
  5. If you want the ray-traced look back later, re-enable it only after Intel's release notes move the World of Warcraft entry from Known Issues to Fixed Issues.

Confirmed by the vendor.

Source: Intel, Intel Community

Switch WoW to the DirectX 11 renderer

about 5 min

Intel scopes the bug to DX12, and an Arc B580 owner reported their DX12-only rendering fault did not occur under DX11 - though that owner later said they had never enabled ray tracing and the fault stopped on its own, so theirs was a different DX12 fault, not this known issue. This avoids the whole affected code path if you do not want ray tracing anyway.

Applies to: World of Warcraft on Intel Arc graphics where DX12 rendering faults appear

  1. Open Options, then System, then Graphics in World of Warcraft.
  2. Change Graphics API from DirectX 12 to DirectX 11.
  3. Accept the prompt to restart the game client, which is required for an API change.
  4. Check the same area where shadows flickered. Note that ray tracing is a DirectX 12 feature, so it is unavailable on DirectX 11 by design - this trades the feature away rather than fixing it.
  5. If you lose frames after switching, go back to DirectX 12 and use the first fix instead. DirectX 11 is the cheaper diagnostic, not necessarily the better place to stay.

Reported to work by one user; not confirmed by the vendor.

Source: Intel, Intel Community

If ray tracing cannot be enabled at all, update the driver instead

about 20 min

This addresses the other problem, not the flicker: Intel's support article resolves ray tracing and variable rate shading being unavailable on Arc by requiring driver 31.0.101.5186 or newer.

Applies to: Intel Arc graphics where WoW's ray tracing options are missing or greyed out

  1. Check your driver version in Intel Graphics Software, or through the display adapter properties in Windows Settings.
  2. If the version is older than 31.0.101.5186, install the current driver - 32.0.101.9175 WHQL, still the newest on Intel's download page on 17 November 2026 - from Intel's Arc Graphics download page.
  3. Restart, then check whether the ray tracing options in WoW's graphics settings are now selectable.
  4. If they are selectable but shadows now flicker, you have moved on to the current known issue - go back to the first fix on this page.
  5. On a laptop, be aware that Intel's generic driver replaces the build your manufacturer customised and validated. Intel advises reinstalling the manufacturer's driver once you have finished testing.

Confirmed by the vendor.

Source: Intel, Intel

Clean-install the driver with DDU if other DX12 artefacts persist

Check before applyingabout 30 min

Intel support's standard next step for Arc rendering faults in WoW - though the one player in that thread who did it could not say whether it was what helped - worth doing only once the cheaper settings changes have not explained what you are seeing.

Applies to: Intel Arc graphics with DirectX 12 rendering faults in World of Warcraft beyond the known shadow flicker

Before you do this

Removing a display driver leaves the PC on a basic display adapter until the new driver installs, so have the installer downloaded first and do not run DDU over a remote desktop session you need to stay connected through.

First:

  • Download the replacement Intel Arc driver before removing the current one
  1. Only do this if disabling ray tracing did not stop the flicker, or if you are seeing other DirectX 12 corruption beyond tree shadows. A leftover driver state is not the cause of the known issue itself.
  2. Download the current Intel Arc driver before you start, so you are not left without one.
  3. Download Display Driver Uninstaller (DDU) and run it in Windows Safe Mode, choosing to remove the Intel graphics driver.
  4. Restart, then install the Intel driver you downloaded.
  5. Intel also suggests turning off High Definition Textures in the Battle.net launcher's WoW options while testing, and disabling compute effects alongside ray-traced shadows.

Source: Intel Community, Intel

Known issues

  • Intel lists flickering tree shadows in World of Warcraft Classic and Dragonflight on DX12 with ray tracing enabled as an open known issue across every Arc graphics family, with no fix in the current driver.

    Affects Intel Graphics Driver 32.0.101.9175 WHQL (4 November 2026), Intel Arc B-Series, Intel Arc A-Series, Intel Core Ultra Series 1, 2 and 3 with built-in Arc GPUs · Status: workaround only

  • The separate older problem - ray tracing and variable rate shading could not be enabled at all in World of Warcraft on Arc graphics - was resolved by driver 31.0.101.5186 and newer.

    Affects Intel Graphics Driver versions older than 31.0.101.5186, Intel Arc A-series and B-series graphics · Status: fixed

If none of this worked

Intel names two specific clients - World of Warcraft Classic and World of Warcraft Dragonflight - so take that literally. The same release notes add Game On support for World of Warcraft: Forever without listing the shadow flicker against it, which means Intel has not acknowledged the bug for the current retail client. If you are on Forever and seeing flickering shadows, the workaround here is still cheap to try, but you are outside what Intel has confirmed. Also be careful not to file every Arc rendering oddity under this heading: flickering that affects whole surfaces, textures or the sky rather than tree shadows specifically, flickering that happens with ray tracing already off, and flickering under DirectX 11 are all different problems. Crashes are a different matter again - this known issue is a visual artefact, not a stability bug, so if WoW is closing to the desktop, nothing on this page is your cause.

Common questions

Is there a driver that fixes the flickering?
Not as of 32.0.101.9175, released 4 November 2026, which is still the current WHQL driver as of 17 November 2026. Intel lists the issue under Known Issues in that release. The only way to know it has been fixed is to read the Known Issues section of each new driver's release notes - Intel does not announce these individually.
Does this affect integrated Arc graphics too, or only the dedicated cards?
Both. Intel repeats the entry under Arc B-Series, Arc A-Series, and Core Ultra Series 1, 2 and 3 with built-in Arc GPUs. That breadth is part of why it reads as a driver bug rather than something specific to one card.
I cannot turn ray tracing on at all. Is that the same bug?
No, and it has a proper fix. Intel's support article covers ray tracing and variable rate shading being unavailable in WoW on Arc, and resolves it with driver 31.0.101.5186 or newer. Update the driver rather than changing in-game settings.
Should I just use DirectX 11 permanently?
Only if you do not want ray tracing, since it is a DirectX 12 feature. DirectX 11 sidesteps the affected code path entirely, but it is a trade rather than a fix, and on some systems DirectX 12 performs better. Disabling ray-traced shadows on DirectX 12 is usually the smaller sacrifice.

Did this fix work?

If a step is wrong, outdated, or did not help, telling us is the fastest way to get it corrected. Reports are reviewed before new articles.

Report a problem with this page

Related problems

Sources

  • Intel · Release notes · checked Nov 17, 2026

    • Intel lists "World of Warcraft Classic* (DX12) and World of Warcraft Dragonflight* (DX12) may exhibit tree shadows flickering when raytracing is enabled" as a known issue
    • Intel repeats that known issue under every Arc product family in the list: Arc B-Series, Arc A-Series, and Core Ultra Series 1, Series 2 and Series 3 with built-in Intel Arc GPUs
    • The entry appears under Known Issues rather than Fixed Issues, so Intel had not fixed it in driver 32.0.101.9175
    • Intel scopes the issue to the DirectX 12 renderer and to ray tracing being enabled
    • Driver 32.0.101.9175 WHQL is dated November 04, 2026 and adds Intel Game On Driver support for World of Warcraft: Forever
    • Re-read 17 November 2026: unchanged; the World of Warcraft tree-shadow entry is still under Known Issues for all five Arc product families
  • Intel · Documentation · checked Nov 17, 2026

    • 32.0.101.9175 WHQL Certified, dated 11/4/2026, is the latest Intel Arc graphics driver offered for Windows (re-checked 17 November 2026: still the latest)
    • The driver supports Intel Arc B-Series Graphics, Intel Arc A-Series Graphics and Intel Core Ultra processors with Intel Arc Graphics on Windows 11 and Windows 10 22H2
  • Intel · Knowledge base · checked Nov 17, 2026

    • Being unable to enable ray tracing and variable rate shading at all in World of Warcraft on Intel Arc graphics is a separate, older problem from shadow flickering
    • Intel's resolution for that older problem is to update the graphics driver to version 31.0.101.5186 or newer
    • Intel last reviewed the article on 19 December 2024 and lists it under article ID 000097803
    • Intel lists the affected products as Arc A-series and B-series desktop and mobile graphics, including A380, A580, A750, A770, B570 and B580
  • Intel Community · Forum · checked Nov 17, 2026

    • An Intel support technician recommended disabling advanced DirectX 12 features such as ray-traced shadows and compute effects when troubleshooting a World of Warcraft Classic rendering problem on an Arc B580
    • The same Intel technician recommended a clean graphics driver installation using DDU, installing the latest Intel graphics driver, and disabling High Definition Textures in the Battle.net launcher (the driver linked in that reply was 32.0.101.9150 WHQL)
    • One Arc B580 owner reported in May 2026 that their World of Warcraft Classic rendering problem occurred only under DirectX 12 and that DirectX 11 ran correctly
    • Re-read 17 November 2026: the Intel technician closed the inquiry on 18 May 2026 without a confirmed fix; on 29 May 2026 the B580 owner said they had used DDU and the latest driver, had never enabled HD textures, ray tracing or compute effects, and that the DX12 bugs had stopped with 'no idea what fixed it'. The thread is not marked solved and has no newer posts.