Skip to content
TroubleGrid

No Sound Over HDMI or DisplayPort on an AMD Graphics Card After a Windows 11 Update

Last verified November 2026Tested against Fixed in KB5127936 (28 October 2026) — builds 26200.9818 on 25H2, 26300.9818 on 26H2, Fixed in KB5127653 (28 October 2026) — build 28000.3365 on Windows 11 26H1, Fixed in KB5132061 (10 November 2026) — build 26100.9974 on 24H2 Enterprise and Education, Windows 11 24H2 Home and Pro — past end of updates, so the fix is not offered, Microsoft has not named the update that introduced the problem, Microsoft has not published the list of affected AMD graphics cards, Reported on Radeon R5 430, Radeon R7 430 and Radeon R9 370XGood evidence

Microsoft confirmed a Windows 11 bug that stops HDMI and DisplayPort audio working on some AMD graphics cards, and shipped the fix on different dates per version: KB5127936 for 25H2 and 26H2 and KB5127653 for 26H1, both on 28 October 2026, then KB5132061 for 24H2 Enterprise and Education on 10 November 2026. Check your build with winver and install the newest update for your version. Two catches: Microsoft published no known-issue entry, so it has named neither the update that broke this nor the affected cards; and Windows 11 24H2 Home and Pro is past end of updates, so the fix cannot reach it.

Microsoft never wrote this one up as a known issue. It exists only as a single line — "This update fixes an issue where HDMI and DisplayPort audio playback might fail on certain AMD graphics cards" — repeated inside three separate KB articles, each covering a different Windows 11 version, and in one case tucked under a version tab most readers will not open. That is why searching for the symptom finds general audio advice rather than the actual answer, and why the usual first move of reinstalling the Radeon driver does nothing: on the cards people are reporting, there is no newer driver to install.

Symptoms

  • Windows lists the monitor or an AMD High Definition Audio Device as the output and the level meter moves, but no sound comes from the monitor's speakers
  • Playback sometimes fails with a message that other applications are using the device
  • A 3.5 mm analog cable to the same monitor does produce sound
  • Swapping the DisplayPort or HDMI cable, reinstalling the audio device and reinstalling the AMD driver change nothing
  • Fitting a different graphics adapter makes the problem go away
  • It started after moving to Windows 11 24H2, or after an October 2026 update

Why this happens

A Windows regression in display audio on certain AMD graphics cards

Microsoft acknowledged this only as a fix, in three KB articles: KB5127653 for Windows 11 26H1 and KB5127936 for 25H2 and 26H2, both dated 28 October 2026, and KB5132061 for 24H2 Enterprise and Education, dated 10 November 2026. Each says the update fixes an issue where HDMI and DisplayPort audio playback might fail on certain AMD graphics cards. There is no matching entry in the Windows 11 25H2 known-issues list, so Microsoft has published neither the update that introduced the problem nor which cards it affects. Readers reporting it on Microsoft Q&A point at the October 2026 updates, KB5127648 and KB5127690, and at the move to 24H2.

Install the Windows update that carries Microsoft's fix for your version

The monitor's own volume is muted or has reset to zero

A second problem reported in the same Microsoft Q&A thread looks identical from inside Windows. One reader found the display's on-screen-display volume muted or reset to zero after every restart, shutdown and resume, and raising it brought sound back. Windows cannot see a monitor's internal volume, so its own level meter moves whether the panel is muted or not. Rule this out before concluding you have the Windows bug — the advisor on that thread asked for exactly this check first.

Check the output device and the monitor's own volume

Fixes

Check the output device and the monitor's own volume

about 5 min

Windows cannot read a display's internal volume setting, so a muted monitor looks exactly like a broken audio path.

Applies to: Windows 11, Monitors and TVs with built-in speakers

  1. Open Settings > System > Sound and, under Output, select the monitor or the AMD display-audio device rather than any other endpoint.
  2. Check that the Windows volume is not muted and the slider is turned up.
  3. Using the monitor's own buttons or on-screen menu, check its internal volume is above zero and not muted. Re-check after a restart and after a sleep and resume — one reporter found it reset to zero every time.
  4. Play something and watch the level meter beside the output device. If the meter moves, the monitor is unmuted, and there is still no sound, move on to the next fix.

Reported to work by one user; not confirmed by the vendor.

Source: Microsoft, Microsoft Q&A

Install the Windows update that carries Microsoft's fix for your version

about 30 min

Microsoft shipped this fix on different dates for each Windows 11 version, so which update you need depends on what you are running.

Applies to: Windows 11 24H2 Enterprise and Education, Windows 11 25H2, Windows 11 26H1, Windows 11 26H2

  1. Press Windows+R, type winver and press Enter. Note the version — 24H2, 25H2, 26H1 or 26H2 — and the OS build number.
    winver
  2. Compare your build against the first update that carries the fix. Windows 11 26H1 needs build 28000.3365 or later (KB5127653). 25H2 needs 26200.9818 or later and 26H2 needs 26300.9818 or later (KB5127936). 24H2 needs 26100.9974 or later (KB5132061).
  3. If your build is lower, open Settings > Windows Update, select Check for updates, install everything offered and restart.
  4. KB5127936 and KB5127653 are optional preview updates, so you may never have been offered them. The November 2026 security updates take you past those builds anyway: KB5132061 gives 26100.9974, 26200.9974 and 26300.9974, and KB5132059 gives 28000.3501 on 26H1.
  5. After restarting, re-check winver, then test HDMI or DisplayPort audio again.

Confirmed by the vendor.

Source: Microsoft, Microsoft, Microsoft, Microsoft

Known issues

  • Microsoft records this only as a fix, never as a known issue. KB5127653 (26H1) and KB5127936 (25H2 and 26H2), both 28 October 2026, and KB5132061 (24H2 Enterprise and Education), 10 November 2026, each state that the update fixes an issue where HDMI and DisplayPort audio playback might fail on certain AMD graphics cards. The Windows 11 25H2 known-issues list carries no entry for it, so no originating update and no affected-card list have been published.

    Affects Windows 11 24H2, Windows 11 25H2, Windows 11 26H1, Windows 11 26H2 · Status: fixed

  • Windows 11 24H2 is listed as past end of updates for Home, Pro, Pro Education and Pro for Workstations, and KB5132061 is offered on 24H2 only to Enterprise and Education. A 24H2 machine on a consumer edition cannot receive this fix through Windows Update and has to move to 25H2 or later to get it.

    Affects Windows 11 24H2 Home, Windows 11 24H2 Pro · Status: open

If none of this worked

This page is about a display-audio endpoint that is present and apparently playing while the monitor stays silent. If the AMD display-audio device is missing from Settings > System > Sound and from Device Manager altogether, that is a different failure — a driver or connection problem rather than this Windows bug — and reinstalling the graphics driver is the usual route there. If the device showing Code 10 is a USB headset, DAC or audio interface rather than your display, you are looking at a separate Windows regression limited to USB Audio Class 1.0 devices, which has its own page. And note what the published reports already rule out: those readers tried new cables, reinstalling the audio device, reinstalling the AMD driver and switching to the Microsoft High Definition Audio driver, and none of it helped. If a guide tells you to reinstall the Radeon driver and nothing changes, you have not done it wrong.

Common questions

Will updating my AMD graphics driver fix this?
Probably not. Every published report involves an older Radeon — an R5 430, an R7 430 and an R9 370X — and the reporters say the newest driver they could find for those cards dates from 2022, long before the problem started. They tried reinstalling the graphics driver, reinstalling the audio device and switching to the Microsoft High Definition Audio driver, and none of it made a difference. In those reports the fix is on the Windows side, not the driver side.
Microsoft does not say which cards are affected. How do I know this is my problem?
You cannot know for certain, because Microsoft published neither the affected cards nor the update that introduced the problem. The signature in the reports is specific, though: the display-audio endpoint is present and Windows shows it playing, the monitor itself is unmuted, analog sound from the same monitor works, and new cables and driver reinstalls change nothing. If that matches and your build is below the numbers above, installing the update is the cheap thing to try first.
Should I uninstall the October update instead?
One reporter did restore sound that way, by removing KB5127648 — but that was before Microsoft's fix existed. It is not the move now: it takes that month's security fixes off the machine, and the fix has since shipped in a later update. Install the newer update rather than removing the older one.
Is this the same as the USB audio Code 10 bug?
No. That one is limited to USB Audio Class 1.0 devices — headsets, DACs and interfaces that plug into USB — and Microsoft marked it resolved in KB5132061 on 10 November 2026. This one is display audio carried over HDMI or DisplayPort by an AMD graphics card. The two landed in overlapping updates, which is why they are easy to confuse.

Did this fix work?

If a step is wrong, outdated, or did not help, telling us is the fastest way to get it corrected. Reports are reviewed before new articles.

Report a problem with this page

Related problems

Sources

  • Microsoft · Support page · checked Nov 14, 2026

    • Under the Windows 11, version 24H2 heading this update states that it fixes an issue where HDMI and DisplayPort audio playback might fail on certain AMD graphics cards
    • KB5132061 was released 10 November 2026 and produces OS builds 26300.9974 on 26H2, 26200.9974 on 25H2 and 26100.9974 on 24H2
    • KB5132061 applies to Windows 11 version 26H2 all editions, version 25H2 all editions, and Windows 11 Enterprise and Education version 24H2 only
    • The HDMI and DisplayPort AMD audio fix appears only in the 24H2 portion of this article; the 25H2 and 26H2 audio entry covers USB Audio 1.0 devices only
    • The same update records a fix for USB Audio 1.0 devices that might fail to start and show error code 10 in Device Manager
  • Microsoft · Support page · checked Nov 14, 2026

    • Under Audio in the normal rollout section this update states that it fixes an issue where HDMI and DisplayPort audio playback might fail on certain AMD graphics cards
    • KB5127936 is the 28 October 2026 non-security preview update producing OS builds 26300.9818 and 26200.9818
    • KB5127936 applies to Windows 11 version 26H2 and version 25H2, all editions
  • Microsoft · Support page · checked Nov 14, 2026

    • Under Audio in the normal rollout section this update states that it fixes an issue where HDMI and DisplayPort audio playback might fail on certain AMD graphics cards
    • KB5127653 is the 28 October 2026 preview update for Windows 11 version 26H1, all editions, producing OS build 28000.3365
    • The article's known-issues section lists the USB Audio Class 1.0 failure as still unresolved as of 28 October 2026
  • Microsoft · Release notes · checked Nov 14, 2026

    • Windows 11 version 24H2 is listed as End of updates for Home, Pro, Pro Education and Pro for Workstations, and as supported until 12 October 2027 for Enterprise, Education, IoT Enterprise and Enterprise multi-session
    • The latest update as of 13 November 2026 is KB5132061 at build 26300.9974 for 26H2, 26200.9974 for 25H2 and 26100.9974 for 24H2, all dated 10 November 2026
    • The latest update for Windows 11 version 26H1 is KB5132059 at OS build 28000.3501, dated 10 November 2026
  • Microsoft · Release notes · checked Nov 14, 2026

    • The known-issues list for Windows 11 25H2 contains no entry for HDMI or DisplayPort audio failing on AMD graphics cards
    • The USB audio known issue is limited to USB Audio Class 1.0 devices and is marked Resolved by KB5132061 as of 10 November 2026
    • The USB audio entry lists Code 10 in Device Manager, no audio output, unresponsive or zero volume controls and unresponsive sound settings as its symptoms
  • Microsoft · Support page · checked Nov 14, 2026

    • On Windows 11 the output device is chosen at Settings > System > Sound, under Output
    • Microsoft advises making sure the volume is not muted and the slider is turned up
  • Microsoft Q&A · Forum · checked Nov 14, 2026

    • Three distinct readers report DisplayPort audio that Windows shows as present and playing while no sound reaches the monitor speakers, on Radeon R7 430, Radeon R9 370X and Radeon R5 430
    • The thread was opened 21 October 2026 and the most recent report is dated 4 November 2026
    • Reporters cite the October 2026 updates KB5127648 and KB5127690 and the move to Windows 11 24H2 as when the problem began
    • One reporter restored audio by uninstalling KB5127648 and found the same graphics card unaffected on a Windows 11 26H2 machine
    • Multiple DisplayPort cables, reinstalling the audio device, reinstalling the monitor device, reinstalling the latest available AMD driver and switching to the Microsoft High Definition Audio driver were all reported not to help
    • The newest AMD driver the reporters could find for these cards dates from 2022
    • Fitting a different graphics adapter removed the problem for the original reporter
    • One reporter found the monitor's own on-screen-display volume muted or reset to zero after every restart, shutdown and resume, and raising it restored sound on the analog input
    • An independent advisor recommended checking that the monitor's on-screen-display volume is above zero and unmuted while DisplayPort audio is silent, and noted they could find no published Microsoft advisory matching this combination
    • One reporter saw playback fail with a message that other applications are using the device